Herunterladen Diese Seite drucken
Spewe 610SL Bedienungsanleitung

Spewe 610SL Bedienungsanleitung

Gluhdraht-schneidegerat

Werbung

Glühdraht-Schneidegerät
D
Découpeuse a filament chauffant
F
Trancia a filo incandescente
I
Heated Wire Cutting Device
GB
1901304 | 08-2013 | Spewe.ch
Sicherheitshinweise
Bedienungsanleitung
Instructions de sécurité
Mode d'emploi type
Avvisi di sicurezza
Istruzioni per l'uso modello
Safety Instructions
Operating Instructions
2
3-6
2
3-6
2
3-6
2
3-6
610SL
610SL
610SL
610SL
610SL
Mod. 2012-S02
Art.-Nr. 1000082
1

Werbung

loading

Inhaltszusammenfassung für Spewe 610SL

  • Seite 1 Art.-Nr. 1000082 Glühdraht-Schneidegerät Sicherheitshinweise Bedienungsanleitung Découpeuse a filament chauffant Instructions de sécurité Mode d’emploi type Trancia a filo incandescente Avvisi di sicurezza Istruzioni per l’uso modello Heated Wire Cutting Device Safety Instructions Operating Instructions 610SL 1901304 | 08-2013 | Spewe.ch...
  • Seite 2 Découpe : thermique Alimentation : 230V / 50 Hz Corredo di fornitura : Apparecchio di taglio a filo incandescente tipo 610SL con trasformatore integrato, supporto per parapetto, pinza piatta, filo di ricambio (9 m) fusibile di ricambio, istruzioni per l’uso. Dati tecnici: Lunghezza di taglio: 127 cm Profondità...
  • Seite 3 (2). Put the cutting tool on the scaffolding rod as in the illustration. Equipment safety: Put the Velcro strip (3) around the scaffolding rod. The tool is thus protected from falling down. Fig. 5 610SL 1901304 | 08-2013 | Spewe.ch...
  • Seite 4 Seam: Set seam depth or separating thickness (6). Insert insulation board, push the board forward to the cutting marking desired, lift the cutting bracket (5) and cut out seam. Fig. 7 610SL 1901304 | 08-2013 | Spewe.ch...
  • Seite 5 Board pressure rod: Release the wing grip (10) and press the pressure rod (11) on the board. The board is now held by the tool and cannot fall down. Fig. 10 610SL 1901304 | 08-2013 | Spewe.ch...
  • Seite 6 Si-assicurazione e vite del bullone. (Fusibili 5x20mm) Potential problems / troubleshooting Fig. 13 Replace fuse: turn and remove screw (13) for fine fuses, replace de- fective Si-assurance and bolt screw. (Fuses 5x20mm) 610SL 1901304 | 08-2013 | Spewe.ch...