Initial Use Of The Scale Without The App - Beurer BF 950 Gebrauchsanweisung

7. Initial use of the scale without the app

We recommend using the app for the initial use and implementing all settings. See chapter 6. "Initial use of
the scale with the app". Alternatively, you can configure settings (time, date, creating a user) on the scale
itself.
Setting the time and date
1. Remove the batteries from the protective packaging and insert the batteries into the scale, ensuring that
the battery polarity is correct. "USE APP" flashes on the scale LCD.
2. Place the scale on an even, hard surface; a hard surface is crucial for accurate measurements.
3. Press the "SET" button.
4. Use the " " buttons to set the date (year/month/day) and time (hour/minute) and confirm with the
"SET" button.
5. To change the weight unit (kg/lb/st), briefly press the Unit/Delete/Reset button when the scale is
switched on.
creating a user
1. Briefly apply pressure to the scale twice until "0.0" is displayed.
2. Press the "SET" button. "P-01" is displayed.
3. Use the " " buttons to select the user memory space you wish to use (P-01 to P-08). Confirm using
the "SET" button.
4. Use the " " to configure your user data and confirm with the "SET" button. You can find a detailed
description of all the user data to be configured in the table in chapter "6. Initial use of the scale with
the app".
5. A PIN will be displayed at the end of your settings. This will be required for logging into the app later (see
"Logging into the app at a later time" below); otherwise, it is not needed. "0.0" with initials then appears.
6. For automatic personal recognition, the first measurement must be assigned to your personal user da-
ta. Step onto the scale, ideally with bare feet, and ensure that you are standing still with equal weight
distribution and with both feet on the electrodes.
Logging into the app at a later time
If you have carried out the initial use of the scale without using the app, you can transfer or create your
user on the app as follows.
• Download the free "beurer healthManager" app from the apple app Store (iOS) or from Google
Play (android).
• Start the app and follow the instructions.
• Select the existing scale user within the BF950 settings in the app and enter the PIN shown on
the scale display. Briefly apply pressure to the scale twice until "0.0" is displayed. Press the
"SET" button and select your user with the "SET" button.
20