Setting The Timer - Qlima P522 Gebrauchsanweisung

Fig. 3
Fig. 4
man_P(H)5xx('17).indd 79
Max. 7 meters

SETTING THE TIMER

This timer can be used to delay the appliance startup or shutdown, this avoids wasting
electricity by optimising operating periods.
Programming start up
• Turn on the appliance, choose the mode you want, for example cool, 24°C, high
fan speed.
Turn off the appliance.
• Press the button, the screen will display 1-24 hours, and the
symbol and symbol are flash together.(fig 3)
• Press several times until the corresponding time is displayed.Wait about 5
seconds, the timer will be active, then only the
(fig 4)
• Press again the button or the
symbol will disappear from screen.
Programming shut down
• When the appliance is running, press the
and several symbols are flash together. (fig 5)
• Press several times until the corresponding time is displayed. Wait about 5
seconds, the timer will be active. then only the
(fig 6)
• Press again the button or the
symbol will disappear from screen.
Fig. 5 Fig. 6
Replacing the Battery
To replace the battery, follow the steps below:
1 Use a screwdriver to remove the screw that secures the battery cover;
2 Push the latch to the right side and pull the battery cover out;
3 Replace the battery and slide the battery cover back into the remote;
4 Replace the screw that secures the battery Cover.
Insulating strip Remove
symbol is displayed on screen.
button, the timer will be canceled, and the
button, the screen will display hours,
symbol is displayed on screen.
button, the timer will be canceled, and the
Fig. 7
symbol and
4
79
27-12-17 12:31