Inserting/Replacing a Photo
Slide the desired photo in format 10 x 15 cm through
the photo slot (7) at the top side of the frame.
Use the recess (8) to slide up the photo from the
frame in order to remove and replace it.
Using the Pen Holder
1. Pull out the tripartite rear side of the pen holder and
setup the device upright.
2. The panel at the rear side of the photo frame serves
as the bottom of the pen holder.
Cleaning and Storing
Clean the device only with a dry or lightly moistened
cloth. Do not use aggressive chemicals or abrasives
for cleaning. Do not immerse it in liquids of any kind.
Store the device indoors in a dry place that is
protected from dust, dirt and extreme temperatures.
Using
12