Mounting And Securing The Motors - SOMFY AXOVIA 220B RTS Installationsanleitung

Axovia 220B RTS

5. MOUNTING AND SECURING THE MOTORS

1) Open the upper cover using the specific key supplied.
2) Unscrew the 2 bolts of the lower cover and remove.
Info card: for improved legibility, use a permanent marker.
3) Secure the motor, checking the level.
4) Assemble:
• the motor arm with an HM screw 10 x 40 (20)
• the leaf arm on the engine arm with the short sha (25)
• Note: the gate arm can be fitted both ways.
• the leaf bracket on the leaf arm with a damper (28), 2 rings (27) and
a long sha (26).
Copyright © 2017 SOMFY ACTIVITES SA. All rights reserved.
5) Unlock the motor arms using the button located on top of the motor.
: arms locked
: manual operation
Attention
In the unlocked position, move the arms slowly to avoid damaging
the motors.
6) To ensure the gate is closed correctly, push the motor arm and the
gate firmly:
• the gate arm must be fully deployed,
• the mounting tab must be flat against the reinforcement,
• the gate arm marking must be aligned with the motor arm arrow.
Attention
Ensure the markers on the motor arm and the gate arm are lined
up to ensure the gate is properly closed and can withstand strong
winds or external forces.
7) Mark the centre-to-centre distances for mounting the bracket to the
gate.
8) Remove the gate arm.
EN
6