Copying An Audio File; Specifications - Monacor PA-1120DMT Einbau- Und Bedienungsanleitung

1) Press the button MENU (10) . The display will
show:
Mode Set
Time
2) Press the button UP (12) or DN (11) repeatedly
until appears on the lower display
SD Card
line .
3) Press the button ENTER (6) . The display will
now show:
Choose
Play
If
Check SD Card
check if the card has been properly inserted
into the slot .
4) Press the button ENTER . The display will now
show:
PlayBack
Voice:01
5) Use the button UP or DN to select the
audio file to be replayed (
Voice:01 – Voice:20
6) Press the button START/ STOP (14) to start the
replay . During replay, the indication on the first
line of the display will change to
If the replay fails to start, there may be no
file with the selected name on the memory
card or the format or the size of the file may
not be correct .

6.6.2 Copying an audio file

To copy audio files to the memory of the insertion
module:
1) Press the button MENU (10) . The display will
show:
Mode Set
Time
2) Press the button UP (12) or DN (11) repeatedly
until appears on the lower display
SD Card
line .
3) Press the button ENTER (6) . The display will
now show:
Choose
Play
If
Check SD Card
check if the card has been properly inserted
into the slot .
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
appears on the display,
M:1 – M:6
) .
Playing
appears on the display,
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
®
4) Use the button UP to select the option
on the lower line .
5) Press the button ENTER . The display will now
show:
Copy
Voice:01
6) Use the button UP or DN to select the file to be
copied (
M:1
7) Press the button ENTER .
appear on the display while the previous mes-
sage is being deleted from the storage . Then,
the display will show
the progress of the copying process .
Then, if required, proceed in the same way to
copy further audio files (
To copy all suitable audio files from the mem-
ory card to the memory of the insertion module,
select the option
the button ENTER .
or

7 Specifications

Frequency range
MIC: � � � � � � � � � � � � � � � � 150 – 15 000 Hz
.
LINE: � � � � � � � � � � � � � � � 50 – 15 000 Hz
Audio input
Connection: � � � � � � � � � � 3�5 mm jack,
Input sensitivity, impedance
MIC: � � � � � � � � � � � � � � � 2�5 mV, 600 Ω
LINE: � � � � � � � � � � � � � � � 245 mV, 10 kΩ
Headphone output
Output power: � � � � � � � � 24 mW max� at 64 Ω
Minimum impedance: � � � 64 Ω
Storage capacity
"Voice01" – "Voice20": � � 20 × 128 kBytes
"M1" – "M6": � � � � � � � � � 6 × 2176 kBytes
Power supply: � � � � � � � � � � 15 – 17 V (⎓), 150 mA
Ambient temperature: � � � � 0 – 40 °C
Dimensions (W × H × D): � � 194 × 40 × 85 mm
Weight: � � � � � � � � � � � � � � � 270 g
Subject to technical modification .
– / –
M:6 Voice:01
ERASE
Copying
☞ step 6) .
in step 4 and press
Copy All
unbalanced
(23 sec�)
(360 sec�)
Copy
) .
Voice:20
will briefly
and indicate
23