Worx WU460 Bedienungsanleitung Seite 8

ADDITIONAL SAFETY
POINTS FOR YOUR JIGSAW
1. Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
2. Fully unwind cable drum extensions to
avoid potential overheating.
3. When an extension cable is required you
must ensure it has the correct ampere
rating for your power tool and that it is in a
safe electrical condition.
4. Ensure your mains supply voltage is the
same as your tool rating plate voltage.
5. Your tool is double insulated for additional
protection against a possible electrical
insulation failure within the tool.
6. Always check walls and ceilings to avoid
hidden power cables and pipes.
7 . After long working periods, external metal
parts and accessories could be hot.
8. Wear eye protection when operating this
tool.
9. The base plate must always be held firmly
against the material being cut to reduce
saw vibration, blade jumping and blade
breakage.
10. If possible, ensure the workpiece is firmly
08
clamped to prevent movement.
11. Your Jigsaw is a hand held tools, do not
clamp your Jigsaw.
12.Before cutting, check the cutting line is free
of nails, screws, etc.
13.Never stop the cutting blade by applying
side pressure to the blade.
14.Only withdraw the blade from the cut when
the blade has stopped moving.
15.Only use blades in excellent cutting
condition.
16.Hold tool by insulated gripping
surfaces when performing an
operation where the cutting tool may
contact hidden wiring. Contact with
a'live'wire will also make exposed metal
parts of the tool'live'and shock the operator
condition.
Jigsaw
M-13L-WU460-061016-·¨ÓïCE´¦ÐÞ¸Ä.indd 8
SYMBOLS
Read the manual
Warning
Double insulation
Wear dust mask
Wear eye protection
Wear ear protection
ENG
2007-3-5 17:01:15