retox Luzern 57 48 97 Bedienungsanleitung Seite 7

Crown Positions
Position X = Normal position
Position A = Position to set the date display
Position B = Position to set the time display
Winding the Movement
During normal wearing, the movement of the watch is automatically wound, but of
course it can be wound by hand with the crown is in the normal position X. A few
turns will start the movement running, but it is advisable to wind the movement
fully by turning the crown clockwise for approximately 20 times. The movement
then has a power reserve of about 35 hours even if the watch is not worn.
Setting the date (Position A)
Check whether the second hand is running before setting the date. If not, give the
watch a few turns and the movement will start running. To set the date, pull the
crown out to position A. Turn the crown until the correct date is displayed.
Setting the time (Position B)
To set the time, pull out the crown to position B. Turn the crown clockwise. When
setting the time, please note that the 24 hour and date displays are also set.
After Setting time and date, push the crown back into position X to ensure water
resistance.
Setting the Month
Press the pusher A to set the month of the year display.
Setting the Weekday
Press the pusher B to set the day of the week display.
English
VI
B
A
X