Electrical connection
GB
IE
VHF - Wire aerial
Handling and operation
Switching the illumination on and off
Switching the appliance on and off , adjusting the
sound volume
8
■
Before connecting the appliance compare the connection data (voltage and
frequency) on the rating plate with that of your electric supply. This data must
agree in order to avoid damaging the appliance.
■
Protect the connection cable from hot surfaces and sharp edges.
■
Ensure that the power cable is not over taut or kinked.
■
Do not allow the cable to dangle over edges (trip wire eff ect).
■
If you do not intend to use the appliance for a long period, disconnect the
plug from the mains power supply.
♦
Completely unwind the wire anntena
In this chapter you will receive important information for the handling and opera-
tion of the appliance.
♦
Press the button LIGHT
♦
Press the button LIGHT
♦
Turn the VOLUME regulator
adjust the sound volume.
♦
Turn the VOLUME regulator
and to switch the appliance off (Position OFF).
NOTICE
►
The VOLUME regulator
from the mains power supply. The appliance also consumes power when
in standby-mode. To completely separate the appliance from the power
supply, the plug must be disconnected from the mains power socket.
12
for VHF radio reception.
9
to switch the running light on.
9
once again to switch the running light off .
17
clockwise to switch the appliance on and to
17
anti-clockwise to reduce the sound volume
17
does not completely disconnect the appliance
SMJB 1.5 A1