Unpacking; Disposal Of The Packaging; Requirements For The Setup Location - Silvercrest SMJB 1.5 A1 Bedienungsanleitung

NOTICE
► Check the contents to ensure everything is available and for signs of visible
damage.
► If the delivery is not complete, or is damaged due to defective packaging or
through transportation, contact the Service Hotline (see chapter Service).

Unpacking

♦ Remove the appliance from the carton.
♦ Remove all packing material.

Disposal of the packaging

The packaging protects the appliance against transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material
and reduces generated waste. Dispose of packaging material that is no longer
needed as per the regionally established regulations.
NOTICE
► If possible, preserve the appliance's original packaging during the warranty
period so that, in the event of a warranty claim, you can repackage the
appliance ideally for its return.

Requirements for the setup location

For safe and trouble free operation of the appliance the setup location must fulfi ll
the following provisions:
■ Place the appliance on a fi rm, fl at and level surface.
■ The surface areas of furniture may possibly contain components that could
aff ect the appliance's rubber pads and soften them. If necessary place a
cover under the appliance's pads.
■ Place the appliance so that the extant ventilation openings and the speakers
are not covered.
■ Do not place the appliance in a hot, wet or very damp environment or in the
vicinity of fl ammable materials.
■ The mains power socket must be easily accessible so that the power cable
can be easily disconnected in an emergency.
SMJB 1.5 A1
GB
39