Operation; Setting The Address - Märklin 80 Series Gebrauchsanleitung

2

Operation

2.2 Setting the Address

and the Running Charac-
teristics Parameters
The address and the running charac-
teristics parameters can be changed
with the Mobile Station or the
Central Station. If you do not have
one of these units, your authorized
Märklin dealer would be happy to
help you.
Parameter
Locomotive address
Acceleration delay (up to 55 sec.)
Braking delay
Maximum speed
Volume (speaker)
10
How to set the parameters with the
Mobile Station or the Central Station
can be found in the instructions for
these units.
The following settings can be made:
Register Value
ADDRESS 01 01 – 80
ACC 03 01 – 63
DEC 04 01 – 63
VMAX 05 01 – 63
VOL 63 01 – 63
01 = soft
63 = loud
2.3 Operating with the
Different Power Systems
This model is designed for optional
operation with Märklin Systems
(Mobile Station or Central Station),
Märklin Digital (only with the Control
Unit as a central unit), Märklin Delta
(only with the 6607 Delta Station),
AC power (only with the 32 VA
Märklin transformer), or DC power
(power pack with a maximum voltage
of ± 18 volts DC). Damages caused
by operating the locomotive with
another operating system will be
viewed as taking place in a non-
authorized operating status and
therefore are not covered by the
manufacturer's warranty. The con-
sumer assumes all responsibility for
damages resulting from this situation.
2.3.1 Operating with the
Mobile Station /
Central Station
Please read the instructions for the
Mobile Station or Central Station to
enter this locomotive into the loco-
motive list. Please use the item
number for this locomotive (55034)
to call it up from the database.
The following auxiliary functions are
available on this locomotive:
• Turning headlights on/off that
change over with the direction
of travel.
• Turning the sound of a locomotive
bell on/off.
• Turning the sound of a horn on/off.
• Turning locomotive operating
sounds (motor, auxiliary appliances,
etc.) on/off.