EN
FilterBox
1
Preface
Read this manual carefully before installation, use and service of this product.
Replace the manual immediately if lost. Nederman reserves the right, without
previous notice, to modify and improve its products including documentation.
This product is designed to meet the requirements of relevant EC directives.
To maintain this status, all installation, maintenance and repair is to be done
by qualified personnel using only original spare parts. Contact the nearest
authorized distributor or Nederman for advice on technical service and
obtaining spare parts. If there are any damaged or missing parts when the
product is delivered, notify the carrier and the local Nederman representative
immediately.
2
Description
2.1
Function
FilterBox filters out pollutants such as fumes and dust, class W3 (non alloy
steel to high alloy steel with nickel and chromium > 30 %).
NOTE!
FilterBox is a flexible, modular system that is available in different
configurations. There are three main levels of automation: FilterBox M,
FilterBox A or FilterBox eQ.
Models
FilterBox M
• FilterBox 10M
• FilterBox 12M
• FilterBox Twin
• FilterBox Wall
FilterBox A
• FilterBox 10A
• FilterBox 12A
• FilterBox Twin
• FilterBox Wall
FilterBox eQ
• FilterBox 10eQ
• FilterBox 12eQ
2.2
Main components
See figure 1.
1 .Extraction arm with hood
2. Enclosure
3. Crank for filter cleaning (FilterBox M)
4. Main filter
5. Collector bin
18
Gases are not filtered out.
Features
•
Manual filter cleaning with mechanical crank.
•
Audible alarm when filter needs to be changed.
•
Hood light (optional).
•
Automatic filter cleaning.
•
LCD display.
•
Ability to connect a power sensor clamp to automatically start the fan.
•
Light and ON/OFF fan swith in hood (optional).
•
Outlet (1-phase) for electrical tools.
•
Outlet for compressed air tools.
•
Light and ON/OFF fan swith in hood.
•
Ergonomic handles.
6. HEPA Filter (Accessory)
7. Fan package including silencer
8. Air outlet
9. Control box and control panel
10. Mains fuse: Max. 16 A