Extending The Telephone System; Multiple Handsets - switel DF 831 Bedienungsanleitung

11 Extending the Telephone System

The internationally approved GAP
ity of handsets and base stations from different manufacturers. As a
result, it is possible to integrate SWITEL devices and equipment from
other manufacturers together in one telephone system. It is possible,
however, that some functions are not available.

Multiple handsets

Up to 5 handsets can be registered on the base station.
Registering handsets
Before starting to register a handset, switch the base station to Regis-
tration mode. Press and hold the Paging button on the base station
until you hear an acoustic signal. The base station is then in Registra-
tion mode for the following 60 seconds. Continue with the handset.
5 sec. ‘
Now register the handset; . Page 87. The currently valid PIN code is
used for registration purposes; . Page 86.
The handset is automatically assigned an internal call number follow-
ing registration.
To register handsets from other manufacturers, please refer
to the operating manual supplied with them.
Deregistering handsets
Each handset can be used to deregister other handsets
registered on this base station.
Handsets are deregistered via the menu. Refer to Page 86 for the se-
quence of menu option selections.
1
GAP: Generic Access Profile = Standard for the interoperation of
handsets and base stations from different manufacturers.
1
standard regulates the compatibil-
Activate Registration mode
Extending the Telephone System
Multiple base stations
You can increase the range of your handset by registering it on sev-
eral base stations. The handset can be registered on up to 4 different
base stations simultaneously. Each base station requires its own tele-
phone line socket. Connections can be used with the same call
number or with different ones.
Calls in progress cannot be transferred from one base
station to another.
93