switel TE9 Bedienungsanleitung Seite 23

5 Operation
Taking a call
When the phone rings, lift the receiver and take the
call.
Ending a call
Replace the receiver to end the call.
Making a call
Lift the receiver. Wait until you hear the dialling tone.
Dial the required telephone number using the digit
keys (3).
Redialling
Your telephone stores the last phone number dialled.
To redial the last number dialled, lift the receiver and
wait until you hear the dialling tone. Press the Redial-
ling button (10). The last number dialled is automati-
cally redialled.
Muting button (microphone off/on)
Press the Muting button (5) and keep it pressed during
a call to switch the microphone off. Release the Muting
button (5) to deactivate the muting function and con-
tinue the call.
Flash button on private branch exchanges
If the telephone is connected to a private branch ex-
change, functions such as transferring calls and auto-
matic call back can be used via the R/F button (6).
Please refer to the manual supplied with your private
branch exchange. The sales outlet where you pur-
chased the exchange can provide information as to
whether the telephone will work properly with the ex-
change.
Setting the Flash (Recall) time
At the factory, the flash time is set to 100 ms. In most
cases, you should not alter the standard flash time set-
ting because this is the standard flash time in telephone
networks. However, you can alter the flash time if your
phone is connected to a telephone system which uses
a different flash time.
The flash time is changed using the slide control (12)
on the underside of the unit. There are 2 settings:
100 ms and 300 ms. Move the slide control (12) to the
required position.
G
4
23