Removing A Handset; Call Transfer And Intercom Between Two Handsets; Call Transfer And Conference Call During An External Call; Internal Call (Intercom) - Topcom BUTLER E350 Gebrauchsanweisung

8.2

Removing a handset

You can remove a handset from a base to allow another handset to be registered:
Press menu button
ÆSelect 'Delete HS'. Press OK and select the handset you which to remove (1-4) ÆPress
OK to confirm ÆEnter the PIN code (default='0000') and press
You can only remove existing handsets and others then the one you are
using.
9

Call transfer and intercom between two handsets

These functions only work when more then one handset (like a Twin/Triple/
Quattro version) is registered to the base!
9.1

Call transfer and conference call during an external call

During an external call, press the INT key followed by the number (1-4) of the other handset.
Æ The other handset will start to ring:
– When the other handset takes the line you can talk internally.
If you hang up, the external line will be connected with the other handset.
If you press and hold the INT key for 3 seconds you can talk with the 2nd handset
and external line at the same time (conference call)
– Or press the INT key again to return to the external call.
Æ Press ON-hook button
9.2

Internal call (intercom)

• In standby press the INT key followed by the number (1-4) of the other handset.
• The other handset will start to ring. You can stop the ringing by pressing the ON-hook
button .
• If the other handset answers the call by pressing the OFF-hook button
internally.
• Press the ON-hook button
Topcom Butler ME350/Twin/Triple/Quattro
ÆUse the
button to scroll to 'System' and press
to end the call.
to end the call.
Topcom Butler E350/Twin/Triple/Quattro
.
you can talk
13