Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
2
ON

Auto Off function

In order to preserve the batteries, the measuring device switches off
automatically if it is left idle for 90 seconds.
3
Measuring tyre pressure
1. Switch on the device. The LC display lights up and shows „0.0"
after 2 seconds.
2. Press button 3 to select the unit of measure psi or bar.
Unit of measure conversion psi (pounds per square inch) and
bar: 1 psi = 0.0689 bar / 1 bar = 14.5038 psi
3. Fit valve connector (1) onto valve. The measured value can
be read off directly.
!
The device starts with the measuring mode last selected.
4
Checking tread depth
1. Switch on the device. The LC display lights up and shows „0.0"
after 2 seconds.
2. Move the tread depth gauge (4) corresponding to the tread
depth. The measured value is displayed in mm directly on
the LC display.
08
GB
OFF
1 sec
3 sec

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis