Current Time; Timer - Siemens TK 65 Gebrauchsanleitung

Current time

TIME
--:--
Ä Ä Ä Ä Ä Ä Ä Ä Ä
TIME
Ä Ä Ä Ä Ä Ä Ä Ä Ä
14:39
Ä Ä Ä Ä Ä Ä Ä Ä Ä

Timer

ON AT
--:--
Ä Ä Ä Ä Ä Ä Ä Ä Ä
ON AT
Ä Ä Ä Ä Ä Ä Ä Ä Ä
07:45
Ä Ä Ä Ä Ä Ä Ä Ä Ä
The current time is programmed with this function.
This is required when using the timer function.
q Hold down button
q Select TIME with < or >.
%
q Press button
q Change the setting with < or >.
%
q Press button
q Change the setting with < or >.
%
q Press button
q Press the 6 button. Back to standby.
The set time will be deleted
- if the mains plug is pulled out,
- if the appliance is switched off with the mains switch 1,
- if there is a power failure.
The current time must be input again.
The time at which the appliance will automatically switch
on can be set with this function.
q Hold down button
q Select ON AT with < or >.
%
q Press button
q Change the setting with < or >.
%
q Press button
q Change the setting with < or >.
%
q Press button
q Press the 6 button. Back to standby.
De activating the setting:
q Set the time to --:-- with < or >.
Note: The current time must be set for this function to run.
i
The switch on time is retained even if there is a power
failure or the mains switch 1 is actuated.
%
on display 3 for at least 3 seconds.
, hours display flashes.
, minutes display flashes.
to save the setting.
%
on display 3 for at least 3 seconds.
, hours display flashes.
, minutes display flashes.
to save the setting.
41