Switch To Radio Tuner Source; Select Fm/Am Band; Auto Tuning; Manual Tuning - ZENEC ZE-MC192 Bedienungsanleitung

h
19. Touch to activate/deactivate the MONO function.
0 20. Current radio band indicator.
0 21. Radio frequency indicator.
0 22. User defined equalizer mode.
0 23. Loud setting indicator.
24. Rear setting.
0 25. Volume indicator.

NOTE:
■ This product features a tuner with RDS function. RDS (Radio Data System) is a system
that transmits broadcast station information together with FM programs.
■ You get display of program service name and PTY, tuning to stations broadcasting a
desired PTY, automatic tuning to traffic information, and emergency broadcasts and
radio text display.
■ RDS service was not available in AM broadcasting. RDS service availability depends on
the FM broadcasting provider.

SWITCH TO RADIO TUNER SOURCE

■ Press the [SRC] button on the front panel or on the remote control to switch to the Tuner
source.
You can also access the tuner mode from the MAIN menu directly.

SELECT FM/AM BAND

A
■ Touch the button on the screen, or press the BAND button [
control to change among the following bands: FM-1, FM-2, FM-3, AM-1, AM-2.

AUTO TUNING

■ Press the button on the remote control or touch the
[]
the next available channel by increasing the tuning frequency. Press the button again to
stop searching.
■ Press the button on the remote control or touch the
[]
the next available channel by decreasing the tuning frequency. Press the button again to
stop searching.

MANUAL TUNING

D
■ Touch the or

USING PRESET STATIONS

■ 6 numbered preset buttons store and recall stations for each band. 6 stored stations
(P01-P06) for the current band appear on the screen, touch the channel directly to select
one of them.
You can touch the arrow
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch and hold an on-screen preset button (6) for three seconds. The preset number
appears at the top of the screen.
C
button to increase or decrease the tuning frequency one step.
buttons on the screen to select other stations.
f
button on the screen to seek
g
button on the screen to seek
98
/BAND] on the remote
■