Yamaha PLG100-VL Bedienungsanleitung Seite 26

VL System Parameters
3. Breath Mode ................................................. Settings: BC/WX, Velocity, Touch EG
Sets the control source to be used for "breath" control. This parameter should be set to
"BC/WX" when a breath controller or Yamaha WX-series Wind MIDI Controller is
being used. When set to "Velocity," breath variation is controlled by keyboard initial
touch response. When "Touch EG" is selected breath variation is controlled by a com-
bination of initial keyboard touch response and aftertouch pressure. Initial key veloc-
ity sets the initial breath level, then aftertouch pressure determines the shape of the
subsequent breath envelope.
26
Expressivity of Each Controller
The expressivity will differ depending on the selected controller.
Original Image of
Breathing
BC/WX
Velocity
Touch EG
127
Breath
Control
0
127
Breath
Control
0
You can accomplish the breathing as
you blow the Breath controller.
127
Breath
Control
0
The initial attack determines the sus-
tained breath strength from the begin-
ning through the end.
127
Breath
Control
A
0
You can express the portion "A" with the
velocity and "B" with the aftertouch.
Time
Time
Time
B
Time