Yamaha PLG100-VL Bedienungsanleitung Seite 17

Editing VL Voice Part Parameters
PrsCtrlDpt (Pressure Control Depth) ..................................... Settings: -64 ... +63
Sets the amount of variation produced by the controller assigned to pressure. The higher
the value the greater the variation. Positive values cause an increase in pressure in
response to higher controller values (e.g. increased breath pressure or higher modula-
tion wheel position), while minus values cause a decrease in pressure in response to
higher controller values.
3. Embouchure
Emb CC No. (Embouchure Control Change Number) ... Settings: off ... 95, AT, VEL, PB
"Embouchure" corresponds to the tightness of the lips against the reed or against each
other. In a string instrument voice embouchure corresponds to how strongly the bow is
pressed against the string. Affects both pitch and timbre. The "Emb CC No." param-
eter specifies the controller to be used for embouchure control. When set to "off"
medium embouchure is applied at all times.
• Please note that with many voices accurate keyboard/controller pitch is produced only at medium embou-
chure.
EmbCtrlDpt (Embouchure Control Depth)............................ Setting: -64 ... +63
Sets the amount of variation produced by the controller assigned to embouchure. The
higher the value the greater the variation. Positive values cause an increase in embou-
chure in response to higher controller values (e.g. increased breath pressure or higher
modulation wheel position), while minus values cause an decrease in embouchure in
response to higher controller values.
17