Switching The Speaker Terminal; Making Cable Connections; Hdmi Cables; About Hdmi - Pioneer VSX-826-k Kurzanleitung

Connecting your equipment

Switching the speaker terminal

Three speaker system settings are possible using the
SPEAKERS button.
VSX-826 only: If you selected Surr.Back in The Speaker System
setting (VSX-826 only) on Operating Instructions in CD-ROM,
you can switch between speakers using the SPEAKERS
button. If you selected Height, the button will simply switch
your main speaker terminal on or off. The options below are
for the Surr.Back setting only.
 Use the SPEAKERS button on the front panel to select a
speaker terminal setting.
SPEAKERS DIMMER
Press repeatedly to choose a speaker terminal option:
• SPA – Sound is output from the speakers connected to
the A-speaker terminals and PRE OUT SURR BACK/
FRONT HEIGHT (VSX-821 only) (multichannel playback is
possible).
• SPB – Sound is output from the two speakers connected
to the B-speaker terminals (only stereo playback is
possible).
• SPAB – Sound is output from the A-speaker terminals,
the two speakers in the B-speaker terminals, and the
subwoofer. Multichannel sources are downmixed only
when the STEREO or STEREO ALC mode is selected for
stereo output from A- and B-speaker terminals.
• SP – No sound is output from the speakers.
Note
• The subwoofer output depends on the settings you made
in Speaker Setting on Operating Instructions in CD-ROM.
However, if SPB is selected above, no sound is heard
from the subwoofer (the LFE channel is not downmixed).
• VSX-821 only: You can use speakers with a normal
impedance between 6 Ω and 16 Ω. However, be aware
that only the front speakers are set to a value between
12 Ω and 16 Ω when you select SPAB.
• All speaker terminals (except Speaker B connections) are
switched off when headphones are connected.
10
En

Making cable connections

Make sure not to bend the cables over the top of this unit (as
shown in the illustration). If this happens, the magnetic field
produced by the transformers in this unit may cause a
humming noise from the speakers.
DISPLAY
Important
• Before making or changing connections, switch off the
power and disconnect the power cord from the AC outlet.
• Before unplugging the power cord, switch the power into
standby.

HDMI cables

Both video and sound signals can be transmitted
simultaneously with one cable. If connecting the player and
the TV via this receiver, for both connections, we recommend
using HDMI cables.
Be careful to connect the terminal in the proper direction.
Note
• Set the HDMI parameter to THRU (THROUGH) and set
the input signal to HDMI, if you want to hear HDMI audio
output from your TV (no sound will be heard from this
receiver) (see Setting the Audio options and Selecting the
audio input signal on Operating Instructions in CD-ROM).
• If the video signal does not appear on your TV, try
adjusting the resolution settings on your component or
display. Note that some components (such as video game
units) have resolutions that may not be displayed. In this
case, use a (analog) composite connection.
• When the video signal from the HDMI is 480i, 480p, 576i
or 576p, Multi Ch PCM sound and HD sound cannot be
received.

About HDMI

The HDMI connection transfers uncompressed digital video,
as well as almost every kind of digital audio that the
connected component is compatible with, including DVD-
Video, DVD-Audio, SACD, Dolby Digital Plus, Dolby TrueHD,
DTS-HD Master Audio (see below for limitations), Video CD/
Super VCD and CD.
This receiver incorporates High-Definition Multimedia
Interface (HDMI
This receiver supports the functions described below through
HDMI connections.
• Digital transfer of uncompressed video (contents
protected by HDCP (1080p/24, 1080p/60, etc.))
• 3D signal transfer
• Deep Color signal transfer
• x.v.Color signal transfer
• Audio Return Channel
• Input of multi-channel linear PCM digital audio signals
(192 kHz or less) for up to 8 channels
H D M
I
• Input of the following digital audio formats:
– Dolby Digital, Dolby Digital Plus, DTS, High bitrate
audio (Dolby TrueHD, DTS-HD Master Audio), DVD-
Audio, CD, SACD (DSD 2 ch only), Video CD, Super VCD
• Synchronized operation with components using the
Control with HDMI function (see Control with HDMI
function on Operating Instructions in CD-ROM)
Note
• Use a High Speed HDMI
a High Speed HDMI
properly.
• When an HDMI cable with a built-in equalizer is
connected, it may not operate properly.
®
) technology.
®
cable. If HDMI cable other than
®
cable is used, it may not work