Conceptronic CHD2ULB Benutzerhandbuch Seite 8

ENGLISH
3. Using your 2.5" mobile hard disk box
3.1 Connect the 2.5" mobile hard disk box to your computer
• Turn on your computer.
• Connect the included mini-USB connector of the included mini-USB Y-cable to the mini-USB port of the
2.5" mobile hard disk box.
• Connect the unlabeled USB connector of the included mini-USB Y-cable to a free USB port on your
computer.
The computer will automatically recognize and install the 2.5" mobile hard disk box. No driver installation
is required.
Note : Some computers do not supply enough power on the USB port, which results in a not working 2.5"
mobile hard disk box. When this occurs, you can connect the second USB connector of the USB Y-
cable (labeled 'Power') to another free USB port to provide extra power to the 2.5" mobile hard
disk box.
3.2 Disconnect the 2.5" mobile hard disk box from your computer
The 2.5" mobile hard disk box must be removed safely before you disconnect it from your computer, in
order to prevent data loss.
• Double click on the "Safely Remove Hardware" icon in your system tray.
The "Safely Remove Hardware" window will be shown.
• Click on the connected 2.5" mobile hard disk box (often listed as "USB Mass Storage Device") and click
the "Stop" button.
• Confirm the disconnection by clicking "OK".
The 2.5" mobile hard disk box is now safely removed from your computer. You can now disconnect the
mobile hard disk box.
8