About Specially Shaped Discs; About Ipod/Iphone/Ipad; Auto Power Off Setting; Restoring All The Settings To The Defaults - Pioneer X-HM22-K Bedienungsanleitung

Additional information
• Do not let the signal surface of discs get scratched or
dirty.
• Do not attach pieces of paper or stickers to discs. Doing
so could warp discs, making it impossible to play them.
Also note that rental discs often have labels attached to
them, and the label's glue may have oozed out. Check
that there is no glue around the edges of such labels
before using rented discs.

About specially shaped discs

Specially shaped discs (heart-shaped, hexagonal, etc.)
cannot be played on this unit. Do not attempt to play such
discs, as they could damage this unit.

About iPod/iPhone/iPad

"Made for iPod," "Made for iPhone," and "Made for iPad"
mean that an electronic accessory has been designed to
connect specifically to iPod, iPhone, or iPad, respectively, and
has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect wireless
performance.
iPad, iPhone, iPod, iPod nano, iPod touch, and Retina are
trademarks of Apple Inc., registered in the U.S. and other
countries.
iPad Air, iPad mini, and Lightning are a trademark of Apple Inc.

Auto power off setting

Long press the on the unit for 3 seconds to switch auto
power off setting ON/OFF.
• The operation can be conducted using only the
unit.
• No need to set this using the remote control.
• Initial setting is set to ON.
Note
• When the auto power off is set to ON, "APD ON" will be
displayed on the main display.
• When the auto power off is set to OFF, "APD OFF" will be
displayed on the main display.

Restoring all the settings to the defaults

Use the steps below to restore the all settings to their
defaults.
1 Press STANDBY/ON to turn the power on.
2 Press CD on the remote control or INPUT on
the main unit repeatedly to select CD input.
3 Press OPEN/CLOSE to open the disc tray.
4 Press STANDBY/ON on the unit for
3 seconds while pressing
• "DEFAULT" is displayed while the settings are being
restored. Power is turned off.
• No need to set this using the remote control.
on the
.
11
35
En