Headrests - Sopur Xenon2 SA Bedienungsanleitung

Height-adjustable backrest
The backrest may be set to various back heights, in 25 mm
steps (4 adjustment ranges: 250-300 mm, 300-400 mm,
400-450 mm and 450-475 mm).
Remove the side pads of the upholstery and if necessary the
backrest belt covering the screws.
Release the screw (1) and set the backrest to the desired
height, then tighten the screws again, (Fig.6.6.5).
See the page on torque.
CAUTION!
Please take into account the altered centre of gravity
when setting the angle of the backrest.

6.7 Headrests

Headrests
The headrest (Fig. 6.7.1) can be raised and moved horizontal-
ly both forwards and backwards.
To do this, loosen the screw (1,2 or 3).
Now you can adjust to the desired position. Tighten screws
again (see the page on torque).
XENON 2 SA
Fig. 6.6.5
Fig. 6.7.1
55
1
1
2
3
Rev.4.0