Technical Specifications - Rothenberger ROFUSE II Bedienungsanleitung

NAME OF THE PARTS, STANDARD SPECIFICATIONS, ACCESSORIES
1. Technical specifications
Power supply voltage
Frequency
Maximum power
Max. input current
Maximum welding current
Welding current at 60%
Welding system
Manual data input system
Welding voltage
Ambient operating temperature
Field of application
Protection level
Output to printers
Storage capacity
Dimensions length x width x height
Weight
The welding machine can only weld the following bushings:
PE water/gas pressure bushings< 48V Ø max 400 mm
Elofit, Durafuse, Eurostandard, Strengweld, Riesselman, Manibs, Wavin/Monoline, Friatec, Plastitalia, George
Fischer, Plasson/Fusamatic, Central Plastic, Hydroblock, Uponor, Degaz, Technima, Innogaz, S&L, Girpi, Agru
Summit, Wanquan
PE bushings for drainage < 48V Ø max 315 mm
Frialen/Friafit, Strengweld, Plastitalia, Elofit, PLS
PP-R bushings for sanitary water < 48V Ø max 160 mm
Coprax, Acquatechnik, Niron, Polysistem, Banninger, George Fischer
NOTE: In some countries the products indicated may be classified under another brand
23 23 23
230 V ± 10%
50 Hz ± 10%
3,68 kVA
16A
65 Amp
50 Amp
control in voltage
Time/Voltage
8 ÷ 48V
-10°C +45°C
20 ÷ 315 mm (400 mm in an emergency)
IP 54
RS 232 serial
300 welding cycles
340 x 235 x 295 mm approx.
25 Kg approx.
ENGLISH