Troubleshooting - STEINEL HS 5130 Bedienungsanleitung

Troubleshooting

Malfunction Cause
y
Sensor Spotlight without Fuse has blown; not swit-
power
ched on; break in wiring
y Short-circuit
y
During daytime opera-
Sensor Spotlight does not
tion, light treshold set to
switch on
nighttime operation
y
Light bulb burned out
y Power switch off
y
Fuse blown
y
Monitoring zone not tar-
geted properly
y
Continuing movement in
SensorLamp does not
monitoring zone
switch off
y Animals moving in detec-
SensorLamp is always
tion zone
switching on/off
y Wind is moving trees and
SensorLamp switches on
shrubs in detection zone
when it should not
y
Cars in street are being
detected
y
Sudden temperature
changes due to weather
(wind, rain, snow) or
warm air from exhaust
fans or open windows
y
Varying ambient tempe-
Change in SensorLamp's
ratures
range
12
Remedy
y
Replace fuse; switch on
power switch; check wir-
ing with voltage tester
y Check connections
y
Change setting
y
Replace light bulb
y Switch on
y
Replace fuse, check con-
nection if necessary
y
Recalibrate
y
Check detection zone,
and recalibrate or shroud
if necessary
y Tilt sensor up or shroud
appropriately; change
detection zone
y Change detection zone,
or shroud
y
Change detection zone,
tilt sensor down
y
Change detection zone
or install at different spot
y
When cold, shorten sen-
sor's range by tilting it
down
y
When warm, tilt it up
Operating guarantee
This STEINEL product has repair or replacement of de-
fective parts at our own dis-
been manufactured with
great care, tested for proper cretion. The warranty does
operation and safety in ac- not cover damage to wear
cordance with applicable parts, nor does it cover dam-
regulations and then sub- age or defects caused by
jected to random sample in- improper treatment, mainte-
spection. STEINEL guaran- nance or the use on non-
tees that it is perfect condi- genuine parts.Further conse-
tion and proper working or- quential damage to other
der. The warranty period is objects shall be excluded.
36 months, starting from the The warranty will only be ho-
date of sale to the consumer. noured if the product is sent
We will remedy defects to the appropriate Service
caused by material flaws or Centre fully assembled and
manufacturing faults. The well packed with a brief de-
warranty will be met by scription of the fault, receipt
or invoice (date of purchase
and dealer's stamp).
Repair Service:
Our Customer Service De-
partment will repair faults not
covered by warranty or after
the warranty period. Please
send the product well
packed to your nearest Ser-
vice Centre.
13