Special Active Source Selection Mode And Setting Adjustments - Ecler CA40 Bedienungsanleitung

4.2. Special active source selection mode and setting adjustments

Use the knob on the front panel to access special modes for selecting active sources and
adjusting levels and equalization (bass and treble). You can access these modes by holding in the
knob for a certain time and then turning it. By adjusting the level of each source you can mix the
signal from the microphone and another line, and the result of this mix will be controlled by the
general output volume of the unit together, in other words, respecting the levels of each source.
The full procedure for accessing and operating in these special modes and the options
available in each are set out in the following graph:
8