Maintenance Mode - MV Agusta F4 Bedienungsanleitung

4.4.6. "MAINTENANCE" Mode *
J Check the tyres
Access "MAINTENANCE" mode and press "OK" for
less than four seconds until "TYRE DISPLAY" appears.
WARNING
The display modes may be changed or set
when the engine is on, the gear in neutral, the
motorbike stationary with your feet on the
ground. Do not change the display while dri-
ving.
Press "OK" again to display the front tyre pressure
and temperature ("FRONT").
Press "SET" to display the rear tyre pressure and tem-
perature ("REAR").
(*) : This function is present only on certain models
OPERATION
- 53 -
4
4