To be integrated with a complete reading of the technical specifications
Positioning and installing
•
Commissioned by a qualified DEALER who has issued the warranty and maintenance manual
•
Room ventilation
•
Only the stove outlet passes through the smoke channel/chimney flue
•
The smoke channel has: a maximum of 2 curves, a maximum 2 horizontal metres
•
Chimney pot that is high enough to avoid downdraft areas
•
The discharge pipes are made of a suitable material (stainless steel is recommended)
•
When using any flammable materials (e.g. wood), all precautions have been taken to prevent a fire hazard
Use
•
Good quality, dry pellets are used
•
The chimney pot and ash compartment are clean and well positioned
•
The door is closed properly
•
The combustion chamber is inserted properly into the relevant compartment
REMEMBER TO VACUUM THE COMBUSTION CHAMBER BEFORE EACH IGNITION
Should ignition fail, DO NOT re-ignite until you have emptied the combustion chamber.
TELEPHONE COMBINER FOR REMOTE IGNITION (code 281900)
The stove can be ignited remotely by asking the DEALER to connect the telephone combiner to the serial port behind
the stove via the optional cable (code 621240).
KIT 11 for channelling hot air into an adjacent room, with max channelling pipe length 1.5 m (code 645700).
KIT 11 BIS for channelling hot air into a non-adjacent room, with max channelling pipe length 5 m (code
645710).
GlassKamin
(code 155240)
Used for cleaning the cera-
mic glass
CHECK LIST
OPTIONAL EXTRAS
CLEANING ACCESSORIES
55
Ash vacuum cleaner (code
275400)
Used for cleaning the
hearth