Herunterladen Inhalt Inhalt Diese Seite drucken

Schneider Airsystems UNM STV 650-10-270 Original Bedienungsanleitung Seite 7

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 19
Table of contents - Part 1
1.1
General information ..................
1.2
Scope of delivery ......................
1.3
Conventional use ......................
1.4
Technical data ..........................
1.5
Components.............................
1.6
Maintenance.............................
1.7
Compressor inspections .............
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1
General information
Observe the safety instructions!
Read the Instruction Manual!
Note: Read and memorise part 2 of the in-
struction manual!
1.4
Technical data
Suction capacity
Effective delivered volume
Voltage
Electric protection, delayed-action
Motor output
Max. operating speed
Compression final pressure
Switch-on pressure
Vessel capacity
Maximum permissible working overpressure of vessel
1
Oil quantity
L
as per DIN 45 635 T 13, 1 m distance
pA1
Overall dimensions: width x depth x height
Weight
Max. number of switching cycles
Operation/Downtime ratio
Min. distance to wall
Ambient temperature
1.
Initial filling: mineral oil up to 10 °C. Under 10 °C, use fully synthetic oil.
1.5
Components
01
Compressor unit
02
Intake filter
03
Oil filler plug
04
Oil drain screw
05
Oil inspection glass
Subject to technical modifications. Illustra-
tions may deviate from the original.
3
1.2
Scope of delivery
3
– Compressor with instruction manual
3
– Rubber dampers
3
– Documents accompanying compressed air
3
vessel
4
1.3
Conventional use
4
The compressor is designed for generating
and storing compressed air only. Com-
pressed air is only suitable for compressed
air tools/devices/machines.
Any other type of use is considered contrary
to the intended use.
06
Pressure pipe
07
Check valve
08
Vessel
09
Ball valve at condensate drainage point
10
Pressure switch with ON/OFF switch
11
Safety valve
UNM-STV 650-10-270
650 l/min
520 l/min
400 V
20 A
4.0 kW
950 rpm
10 bar
8 bar
270 l
11 bar
1.34 l
83 dB(A)
850 x 830 x 1820 mm
160 kg
10 1/h
60:40 --
40 cm
5-35 °C
GB
I/3

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis