14.3
Setting the spindle speed
14.3.1 Main spindle speed
ATTENTION: Never change the speed before the motor / spindle has stopped completely!
The speed of the main spindle is determined by the speed controller A / B / C and the lever 1 -
voted 3 - 2. For both the high and low-speed stage, there are various positions.
For the appropriate speed, refer to the speed table under the two levers (9 and 10)
The setting can be supported by slight rotation of the chuck by hand.
14.4
HOLZMANN MASCHINEN GmbH
www.holzmann-maschinen.at
METALLDREHMASCHINE / METAL TURNING LATHE ED 1000N / ED 1000NDIG
OPERATION
Seite 43