Use; Device Overview; Operation - Intenso S10000 Bedienungsanleitung

USE

Device overview

3 - OUT
(integrated
microUSB
charging cable)

Operation

1. LED Status display
The current charge status of the Powerbank is displayed via the status LEDs when charging or
discharging the Powerbank.
% Energy
1 % - 25 %
26 % - 50 %
51 % - 75%
76 % - 100 %
2. Commissioning / Charging the Powerbank / Charging connected Devices
a) Charging the Powerbank
Connect the supplied microUSB cable with the microUSB port (IN) of the Powerbank and
connect the other end of the USB cable with a standard USB port of a computer or USB power
supply. The charging process and the current charge status is signalled via the LED status lights
When the Powerbank is fully charged, the LED status lights are permanently on. The required
charging time of the Powerbank is dependent on the selected charging source and its output
(max. 5V / 2.1A).
4 - Status LEDs
LED 1 LED 2
EN - Page 3 of 7
1 - OUT
2 - IN
LED light
LED 3 LED 4