Technical Data; Noise Information; Vibration Information - Worx WG212E.1 Übersetzung Der Original-Anleitung

1. REAR HANDLE
2. REAR SWITCH LEVER
3. FRONT SWITCH LEVER
4. FRONT HANDLE
5. SAFETY GUARD
6. BLADE
7. BLADE SHEATH*
*Not all the accessories illustrated or
described are included in standard delivery.

TECHNICAL DATA

Type WG212E.1(2-designation of machinery,
representative of Hedge Trimmer)
Rated voltage
Rated power
Rated no load speed
Blade length
Cutting diameter
Machine weight
6
Protection class

NOISE INFORMATION

A weighted sound
pressure
A weighted sound
power
Wear ear protection
when sound pressure
is over

VIBRATION INFORMATION

Vibration total values (triax vector sum)
determined according to EN 60745:
Vibration emission value:
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
Hedge trimmer
230-240V ~ 50Hz
500W
2600/min
51cm
17mm
2.4kg
/ II
L : 87dB(A) K =3dB(A)
pA pA
L : 100dB(A)
wA.d
80dB(A)
a = 3m/s
2
h
Uncertainty K = 1.5m/s²
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the
ways in which the tool is used dependant on the
following examples and other variations on how the
tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained
The use the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the
operating cycle such as the times when the tool is
switched off and when it is running idle but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration
tool use across a number of days.
ACCESSORIES
Safety Guard
Blade Sheath
We recommend that you purchase your accessories
from the same store that sold you the tool. Choose
the type according to the work you intend to
undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and
offer advice.
C or less.
0
1
1
EN