Introduction; Mounting; 1: Mounting On Wall; 2: Mounting On Din-Rail - Danfoss Link HC Installationsanleitung

Installation Guide

Introduction

Danfoss Link™ is a wireless control system for a variety of heating systems .
The Danfoss Link™ HC (Hydronic Controller) is a part of this system allowing wireless control of
manifolds for water based floor heating/cooling .
Boiler relay Pump relay
External
Front
Antenna cover
release

Mounting

The Danfoss Link™ HC should always be mounted in an horizontal upright position .

1: Mounting on wall

1 . Remove front and side covers and mount with screws and wall plugs .

2: Mounting on DIN-rail

1 . Mount DIN-rail parts .
Danfoss Link™ HC
Output LEDs
Output connections
Inputs:
Not in use
Away Function (external ON/OFF switch)
Heating/Cooling (external ON/OFF switch)
2 . Click on DIN-rail .
VIFZL15X © Danfoss
Install / Link Test
3 . Release from DIN-rail .
08/2010
GB
5