Herunterladen Inhalt Inhalt Diese Seite drucken

LaserLiner BeamControl-Master Bedienungsanleitung Seite 16

Vorschau ausblenden Andere Handbücher für BeamControl-Master:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Adjust horizontal
Start adjusting the vial (X) by turning the
levelling screws (A) and (B).
!
Please look always vertically at the vial
in order to avoid reading errors.
Now turn the levelling screw (C) to adjust
the vial (Y).
!
Repeat the whole action, if necessary.
Adjust vertical
Set the BCM up vertically on its integral
handles or mount the BCM onto a stand.
Now adjust only the vial (Z) with the
levelling screw (C).
Operation
Switch on BCM:
Hold the key
„On/Off" pressed for 1 second, the head of BCM starts
rotating, the rotation mode is activated.
1. Spot mode:
The rotation laser sends out a laser beam
exactly to thans ofe point over a great
distance. In order to get into the spot mode
reduce the speed by me to zero.
Change position
on rotation laser
with SensoCommander
16
EN
A
vial X
vial Z
.
B
vial Y
C
C

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis