To Assemble The Grass Catcher; To Assemble The Mulching-Kit - Husqvarna LC 141Li Bedienungsanweisung

2. Dismantle the knob, washer, and screw.
3. The handle can be set to 2 different heights. Adjust
the handle to a suitable height with the fixing screw
in one of the two holes.
4. Fit the screw and knob.
5. Slide the knobs up towards the handle until they stop
and a click is heard. Tighten the knobs properly.

To assemble the grass catcher

1. Insert the edging strip of the catcher bag into the
groove around the upper cover and press on the
strip to the end.
71 - 001 - 03.11.2016
2. Fasten the three snap fasteners around the bar of
the upper cover.
3. Attach the hooks in the upper edge of the chassis.

To assemble the mulching-kit

A mulching-kit is available as an optional accessory, to
make products equipped with a catcher able to use
mulching function. The kit contains of a mulch plug and
a combi blade.
1. Lift up the rear shield and remove the grass catcher.
2. Insert the mulch plug into the grass catcher channel.
Type A is for LC 141Li and LC 141C. Type B is for
LC 141VLi.
A
3. Close the rear shield.
4. Replace the blade with the combi blade supplied in
the mulching-kit. For more information, see
replace the blade on page 118 .
B
To
111