Interference In Transmitting And Receiving Performance - Ortovox S1 SCANNER Gebrauchsanleitung

6. Turn over the S1. Display faces downwards.
Battery compartment is visible. Wait for beep.
7. Turn over the S1 again.
Display now faces upwards again. Wait for beep.
The calibration process is finished.
Note: After each battery change the S1 requests
calibration after the self-test.
Now press the "OK button" (calibration starts).
Continue as from Point 5.
By pressing the "MENU" button the calibration can be
rejected and carried out at a later point in time. In this
case the S1 reminds you to calibrate at every restart.
INTERFERENCE IN TRANSMITTING AND RECEIVING
PERFORMANCE
Interference to the transmission and reception performance can be
caused by lightening, lifts and power plants, radio equipment, mobile
phones and other electronic equipment. Mobile phones and radio
equipment should be switched off whilst searching. The minimum
distance between two avalanche transceivers and to metal, radio
equipment, mobile phones, magnets etc. should be at least 50 cm.
60