COARSE SEARCH
with several helpers
(=search after first receive signal):
For searching with multiple helpers
search through the avalanche deposit
in 30 m wide search strips.
Pay attention to the lateral distance
to the edge of the avalanche. This
distance should not exceed 15 m.
When a transceiver picks up the first
signal it immediately starts with fine-
search.
The other searchers should continue
with the planned search path and the
search strips as described.
COARSE SEARCH
(= Search for first receive signal):
If searching alone, walk through the
presumed area in 30 m wide search
strips to pick up the first signal.
Pay attention to the lateral distance
to the edge of the avalanche.
The d3 allows a search strip width
of 30 m.
After the first signal is received,
proceed in the indicated direction
(= lowest number in the display).
ENGLISH
33