Electrical Connection "C - RK LZ60 S Montageanleitung

7. Working life

7.4.3 Electrical connection "c"

Connection (2.5 m) on the RK synchronous controller.
Wiring for the synchronous controller with 8-pin connector.
Motor direction of rotation
DIN plug Pin 1 + 7
Mini-Fit Jr. Pin 8 M-
1
2
Wiring diagrams
DIN plug
A = Hall sensor output A (open collector)
B = Hall sensor output B (open collector)
C = Hall sensor
D = Upper limit switch
E = Lower limit switch
Vcc = Power supply (+5V to +24V)
GND = Power supply ground
54
Pin 2 + 4
Pin 1 M+
+ -
- +
Direction
Retract
Extend
Mini-Fit Jr.
A = Hall sensor output A (open collector)
B = Hall sensor output B (open collector)
C = Hall sensor
D = Upper limit switch
E = Lower limit switch
Vcc = Power supply (+5V to +24V)
GND = Power supply ground