Dimensions; Basic Lengths/Weights; Load Data; Idling Torques/Effective Pitch/Effective Diameter Toothed Washer - RK MonoLine Z 40 Montageanleitung

6.3 Dimensions

Linear units are produced individually to length in accordance with your specifications.
The width and height of this linear unit is determined from the choice of size and design and can
be taken from the Linear Technology catalogue.

6.3.1 Basic lengths/weights

RK MonoLine Z
Version
RK MonoLine Z 40
Guide slide length 132 mm
Guide slide length 212 mm
RK MonoLine Z 80
Guide slide length 220 mm
Guide slide length 350 mm
RK MonoLine Z 120
Guide slide length 330 mm
Guide slide length 530 mm
RK MonoLine R
Version
RK MonoLine R 40
Guide slide length 132 mm
Guide slide length 212 mm
RK MonoLine R 80
Guide slide length 220 mm
Guide slide length 350 mm
RK MonoLine R 120
Guide slide length 330 mm
Guide slide length 530 mm

6.4 Load data

In dynamic operation, the following must be considered for the design:

6.4.1 Idling torques/effective pitch/effective diameter toothed washer

Idling torque, max.
Toothed washer pitch circumference
Effective diameter toothed washer
Basic length in mm
250
330
416
546
554
754
Basic length in mm
174
254
270
400
390
590
Fx max = m*a [m/s2]
RK MonoLine
Z 40
0.35 Nm
85 mm
27.08 mm
6. Product Information 6. Product Information 6. Product Information
Weight in kg
Basic length
1.94
2.49
9.61
11.92
25,02
32,56
Weight in kg
Basic length
1.20
1.74
4.21
6.49
12,22
19,72
RK MonoLine
Z 80
1.0 Nm
192 mm
61.12 mm
Weight in kg
per 100 mm travel
0.27
0.84
1,78
Weight in kg
per 100 mm travel
0.25
0.78
1,69
RK MonoLine
Z 120
1,8 Nm
239,99 mm
79,39 mm
43 43 43