Bernette Moscow 2 Bedienungsanleitung Seite 82

E55-E82e_EN_DE_TR_EL_310309:07_55-90e_EN_ES_FR_PT.qxd
55
31.3.2009 14:36 Seite 80
EN GB
Buttonhole-making is a simple process that
provides reliable results.
Making a Buttonhole
1. Using tailor`s chalk, mark the position of the
2. Attach the buttonhole foot and set the
3. Lower the presser foot aligning the marks on
4. Open the button plate and insert the button.
5. Lower the buttonhole lever and push it back
6. While gently holding the upper thread, start
7. Buttonhole stitching is done in the order
8. Stop the machine when the buttonhole is
Making a Buttonhole on Stretch Fabrics
(fig. E)
When sewing buttonholes on stretch fabric, place
a gimp thread under the buttonhole foot.
1. Mark the position of the buttonhole on the
2. Hook the gimp thread onto the back end of
3. Lower the presser foot and start sewing.
4. Once sewing is completed, gently pull the
How to sew buttonholes
buttonhole on the fabric.
pattern selection dial to " ".
foot with the marks on the fabric as shown
in fig. (A). (The front bar tack will be sewn
first.)
(fig. B)
fig. (C).
the machine.
shown in fig. (D).
sewn.
fabric with the tailor`s chalk, attach the
buttonhole foot, and set the pattern
selection dial to " ".
the buttonhole foot, then bring the two
gimp thread ends to the front of the foot,
insert them into the grooves and temporarily
tie them there.
*Set the stitch width to match the diameter of
the gimp thread.
gimp thread to remove any slack, then trim
off the excess.