Transport And Disposal; Preparation For Transport, Protection Against Freezing And Measures For Longer Periods Of Non-Use - Melitta LATTEA Bedienungsanleitung

10 Leave the milk shower open.
11 empty the coffee grounds container and the drip tray and then reinsert the
drip tray. Place the coffee grounds container under the milk shower again.
→
the symbol for the water reservoir
12 Rinse out the water reservoir and fill it with tap water to the Max. marking.
13 Press the button for brewing strength
decalcifying program.
→
Water flows in multiple intervals out of the milk shower into the coffee
grounds container. the symbol for the milk shower
process. subsequently, the symbol for the milk shower
14 turn the rotary switch for the milk shower anticlockwise to close the milk
shower.
→
Water flows inside the appliance into the drip tray. Subsequently, the symbol
for the drip tray
15 empty the drip tray and then reinsert it.
→ the standby symbol
the appliance is ready for operation.
16 Reinsert the Melitta claris

 Transport and disposal

Preparation for transport, protection against freezing and mea-
sures for longer periods of non-use
Allowing liquids in the appliance to evaporate
We recommend that you dry out the appliance if it will not be used for an extended
period of time. this protects the appliance from damage due to freezing.
Prerequisite: The appliance is ready for operation.
• take the Melitta claris

Heft_Lattea_EU.indd 72
is illuminated.
, to continue with the integrated
will be illuminated.
is illuminated after a brief heat-up phase.
water filter into the appliance.
®
water filter out of the water reservoir.
®
flashes during this
will be illuminated.
09.07.2009 15:29:12