Ikra HHTI 45 Gebrauchsanweisung Seite 33

Troubleshooting
Problem
Unit does not run
Blade cutter is running hot
Blade cutter will not move
Excessive vibrations/noise
Pole trimmer operates intermittently
We, Ikra GmbH, Schlesier Straße 36, D-64839 Münster, declare under our sole responsibility that the product
Electric Telescopic Hedge Trimmer HHTI 45, to which this declaration relates correspond to the relevant basic
safety and health requirements of Directives 2006/42/EC (Machinery Directive), 2004/108/EC (EMV-Guideline),
2011/65/EU (RoHS-Guideline) and 2000/14/EC (noise directive) incl. modifications. For the relevant implementa-
tion of the safety and health requirements mentioned in the Directives, the following standards and/or technical
specification(s) have been respected:
EN 60745-1: 2009+A11:2010; EN 60745-2-15:2009+A1:2010; EN 50581:2012
EN ISO 10517:2009+A1:13
EN 55014-1:2006/A1:2009/A2:2011; EN 55014-2/A2:2008; EN 61000-3-2/A2:2009, EN 61000-3-3:2013
EN ISO 3744:2009, ISO 11094:1991
measured acoustic capacity level
guaranteed acoustic capacity level
Conformity assessment method to annexe V / Directive 2000/14/EC
The year of manufacture is printed on the nameplate and can be additionally retrieved via the consecutive serial number.
Münster, 0 .1 .2015
Maintenance of technical documentation: Gerhard Knorr, Kärcherstraße 57, DE-64839 Münster
Possible Cause
Power cord not connected
Lock off not fully operated
Blade cutter dull
Blade cutter has dent
Too much friction, due to lack of
lubricant
Machine defective
Machine defective
Internal wiring of machine damaged
On/Off switch defective
EC Declaration of Conformity
dB (A)
,0 dB (A)
Gerhard Knorr, Technical Management Ikra GmbH
GB-15
Possible Solution
Check power supply connection
Check that lock off is fully forward
prior to moving trigger
Have blade sharpened
Have blade inspected/ overhauled
Apply lubricant spray
Contact Service Agent
Contact Service Agent
Contact Service Agent
Contact Service Agent