Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Cleaning and user maintenance shall not be made by
children without supervision.
• If the supply cord of power adaptor is damaged, it
must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid
a hazard.
• Do not store or use gasoline or any other flammable
vapors and liquids in the vicinity of this unit. The fumes
can create a fire hazard or an explosion.
1.3 MEANING OF CROSSED-OUT WHEELED DUSTBIN:
Do not dispose of electric appliances as
unsorted municipal waste, use separate
collection facilities. Contact your local
government for information regarding
the collection system available. If elect-
rical appliances are disposed of in land-
fills or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your
health and well-being.
When replacing old appliances with new ones, the
retailer is legally obligated to take back your old applian-
ce for disposals at least free of charge.
The manufacturer is not responsible for damages resul-
ting from the improper use of the product.
1.4 TEMPERATURE CONTROL
The cooler is shipped ready for use. The temperature
control is preset from the factory. As needed, the tem-
perature control can be adjusted Clock-wise to make the
product „colder", the control can be adjusted Counter
Clockwise to make the product „Warmer".
The temperature preset by the manufacturer is suitable
for beverage. Because the regulation too cold Setting
can cause freezing of the products. The best cooling
performance is achieved if the unit is optimally filled and
the air circulation inside is unobstructed by the products
inside the refrigerator.
1.5 INFORMATION FOR YOUR SECURITY
The construction of this cooler is made according to the
IEC/EN 60335-1/-2-89. This eqipment is intended for sto-
rage and display of nonpotentially hazardours, bottled or
canned products only.
1.6 RESPONSIBILTY OF THE CUSTOMER
The appliance is suitable to provide the voltage on the
data plane. Make sure that the cooler is placed on a
level surface.
8
8
2. ITEMS DELIVERED
The delivery consists of the following components:
• Main plug (a)
• Power supply (b)
• Drip tray for condensation (c)
• Accessory cable for LED-base, optional (d)
Connect the main plug (a) to the power supply (b) and
then to a wall socket.
The drip tray (c) is located underneath the bordbar and
should be emptied as necessary.
(a)
(b)
(c)
The enclosed accessory cable (d) is necessary for the
optional LED-base in combination with a cooling unit.
Insert one end of the cable into the opening located
at the top of the cooling unit and the other end of the
cable into the opening on the underside of the LED-base.
(d)
3. INSTALLATION
3.1 POSITIONING
• The cooler must be placed in an adequately ventilated
room. Keep away from heat sources, such as radiators
or air conditioning pipes. Allow free air circulation to
the refrigerator unit.
• If you wish to refrigerate other obejcts, please check
whether the cooling range and storage space meets
the requirement of the objects to be stored before
placing them in the cooler.
• Place the cooler in a dry place; indoors or under cover.
The cooler should not be used outdoors where it could
be exposed to rain.
• The operating temperature of the cooler is 5°C to 30°
(41°F to 86°F). The cooler should not be used outside
of this temperatur range. NOTE: Direct sun may heat
the body to a higher level than the apparent ambient
temperature.
• Placement of the cooler should be well ventilated and
at a distance of at least 10 cm away from wall.
3.2 DEVICE OUTPUT
The input power of this cooler is 220-240 V or 100 V,
and through adaptor to supply power, the output power
is DC 12V 7A
TECHNICAL DATA
(100 V-240 V unit)
Input voltage to power adaptor: 100 V-240 V AC
Power:
60 W
Operating temperature:
5°C to 30°C
Cooling range:
14°C lower than
ambient temperature
Operating noise:
36,3 dB
3.3 AMBIENT TEMPERATURE
Climate Classes according to ISO23953-2.
Climate Class
Temperature
Relative
(°C)
Humidity (%)
0
20
50
1
16
80
2
22
65
3
25
60
4
30
55
5
40
40
6
27
70
7
35
75
8
23,9
55
BR16 V2.0 is Climate Class 5.
3.4 LIGHTING
You have a choice between two light settings.
• Automatic Door: When the cooling units door opens,
the light turns on automatically.
• Constant Lighting: Flip the ON/OFF switch at the inside
of the cooler for permanent lighting.
4. MAINTENANCE
• Unplug the unit before cleaning.
• Wipe down with a damp soft cloth. Be sure to avoid
dripping water into or on top of the cooler.
• For persistant marks isopropyl alcohol may also be
used with a soft cloth.
• Use a dry cloth to dry the appliance after cleaning it.
• Clean it at regular intervals as required.
• Slightly open the door wide after cleaning to allow
moisture to fully evaporate.
9
Werbung
