Operating The Walkie−Talkies; Monitor Function - switel WTC 525 Bedienungsanleitung

Selecting a channel
PMR446 (Private Mobile Radio) walkie−talkies can be used throughout Europe free of registration and call charges. There are 8
radio channels available within the frequency range 446.000 MHz to 446.100 MHz.
M X/Y, P
,
Every process is automatically cancelled if there is no input within 5 seconds.
Chan-
nel
1
2
3
4
Scanning for a channel
Signals are searched for in the eight channels in a continuous cycle. SCAN" appears in the display. If an active channel is de-
tected, the channel scan stops. Press the P button to enable radio communication.
Start / End channel search
M Y
X/Y
M
Sending ringing tones
The ringing tones indicate to other subscribers that you want to talk to them. A condition for this is that the other subscribers are
using the same channel.
C
Selecting/Deactivating ringing tones
There are 5 ringing tones available for selection. To deactivate the ringing tone, select the OF" setting.
2 x M
X/Y, P

Monitor function

The Monitor function enables the search for weak signals on the channel currently set. If you receive an external signal, switch to a
free channel. Always communicate with other subscribers on a free channel to prevent interference.
M X
M
Key tone on/off
3 x M
X/Y, P
Select the channel and confirm it
Frequency (MHz)
446.00625
446.01875
446.03125
446.04375
Start channel scanning
Resume channel scanning
Stop channel scanning
The ringing tone is transmitted for 2 seconds
Activate Setting mode
Select ringing tone and confirm it
Monitor the channel
End monitoring
Activate Setting mode
Select ON / OF and confirm it
Operating the Walkie−Talkies
Chan- Frequency (MHz)
nel
5 446.05625
6 446.06875
7 446.08125
8 446.09375
35