Information For Ensuring Electromagnetic Compatibility - Fujitsu CELSIUS Med M460 Gebrauchsanweisung

Instructions for Use
● Only install system extensions that comply with the requirements and regulations on safety and
electromagnetic compatibility of your country's legislation on medical products.
● The fans of the device are maintenance-free. In case of fan failure or reduced fan performance,
a warning symbol appears on the LCD (differs between devices – see operating manual for
device).
● Should the device be used in a patient environment, or if electrically conductive connections
are provided between the product and a patient, additional measures must be carried out on
the product in accordance with EN 60601-1-1:2001.
● The ventilation slots of the device may not be covered to prevent overheating.
● If you operate a radio component (BLUETOOTH, wireless LAN) on your device, maintain the
necessary safety distances to other electrical and electronic devices. The radio waves
transmitted by the radio components can impair the operation of medical devices. Other radio
devices can in turn interfere with the operation of the radio components of your device.
To clean the device, please observe the corresponding instructions in the respective
i
operating manual.

Information for ensuring electromagnetic compatibility

● All data and signal cables must have sufficient shielding. Requirements EN 50173 and
EN 50174-1/2 apply to LAN cabling. Use of unshielded or badly shielded cables may lead to
increased emission of interference and/or reduced fault-tolerance of the device.
● All housing covers (side panels, blind covers) must be installed as described in the operating
manual.
● When installing the device, make sure there is adequate ventilation by providing sufficient
clearance around the device, as indicated in the "Technical data" section of the operating
manual. In order to avoid overheating, do not cover the ventilation surfaces on the monitor or
the device. Do not stack multiple devices on top of each other.
● Portable and mobile wireless communications devices such as mobile phones may influence
medical electrical devices. It is imperative that you observe the safety distances given in
table 4.
● Use only the cables supplied when connecting peripheral devices, such as monitors.
● Use the supplied cable to connect the keyboard.
● Each peripheral device you want to connect must comply with the requirements for use in an
environment with a medical application.
● Only connect a single monitor to the device. An additional monitor is not permitted.
2 - English A26361-K1001-Z290-2-8N19, edition 1