Advanced Functions; Warranty - Dimplex RCE 100 Montageanleitung

RCE 050, RCE 100, RCE 150, RCE 200
12 Activate / deactivate Auto Lock
To lock the control, press the BACK key and ENTER
key for three seconds. The key lock is indicated in the
bottom edge of the display. To unlock the control, re-
peat the action and press the BACK key and ENTER
key for three seconds.
NOTE NOTE
The control cannot be adjusted if the key lock is active.

13 Advanced functions

NOTE NOTE
Open Window - detection is activated at the factory.
ANTICIPATORY - is deactivated at the factory.
To display the User Info menu, press and hold the EN-
TER key for five seconds.

SP Range (setpoint) can be used to define the
maximum possible temperature.

"Open Window" detection (OW). When this func-
tion is activated, the room temperature is reduced
to limit the energy loss when a window is open.

Anticipatory (ES) - If the Anticipatory (ES) function
is activated, the device heats for the pre-set time to
ensure that the room has reached the required
temperature at the right time.
Example: A setpoint room temperature of 21°C is
specified for 7 am via the Timer menu. With the An-
ticipatory (ES) function, the control switches on the
heating device before 7 am to achieve the desired
temperature of 21°C at the selected time of 7 am.
Glen Dimplex Deutschland GmbH
Am Goldenen Feld 18
D-95326 Kulmbach
Subject to technical modifications
EN-20
 Factory Reset- this function resets all settings
made by the user to the factory settings.
14 Cleaning
ATTENTION!
Before cleaning, the device must be disconnected from
the power supply.
Before starting the cleaning process, disconnect the
device from the power supply and let it cool down.
Clean the outside by wiping down with a soft, damp
cloth. Then rub dry.
Do not use abrasive cleaning powder or furniture pol-
ish, as this may damage the surface.
The device can be tilted forwards to enable better
cleaning. See the instructions in section 4, Fig.3.

15 Warranty

This device is supplied with a two-year warranty ac-
cording to our terms of guarantee.
16 Disposal
Dispose of packaging and packaging parts
in accordance with the regulations in the
country where the device was installed.
Do not dispose of the device with household
waste. The device must be taken to a local
waste disposal plant.
Telephone: +49 9221 709 564
Telefax:
E-Mail:
www.dimplex.de
RCE050_200_gb · 04/15/A
+49 9221 709 589
09221709589@dimplex.de
www.dimplex.de/en