Toshiba RBC-CR1-PE Benutzerhandbuch Seite 5

N F
AMES AND
All of the display items are shown in the diagram below for the purpose of explanation. Only selected items are
displayed in actual operation.
1 ON/OFF Display
This displays the operating status of the unit that is
shown in the unit display.
2 Unit Display
This number indicates the selected unit.
3 MONITOR / SET Display
In normal operation monitor is displayed when unit
setting is required SET flashes.
4 UNIT / ALL Display
When all units are selected UNIT ALL is displayed.
5 Connected Unit Display
This display indicates the connected units and their
operating status.
6 MODE Display
Displays selected operation mode.
7 FAN Display
Displays selected fan speed.
8 TEMP Display
This display shows the set temperature.
9 CHECK Display
This display appears when the air conditioner is in
the check mode.
AI C
ENTRAL
– C
UNCTIONS ENTRAL
GB
R C
EMOTE ONTROLLER
R C
EMOTE
10 LOUVER or LOUVER Display
LOUVER is displayed if the automatic louvers are
driven. LOUVER MANUAL is displayed if auto louver
is selected but not available.
11 TIMER Display
This is displayed when a unit is being associated
with a 7 Day Timer.
12 FILTER Display
This display appears after 2500 hrs of operation.
13 STANDBY Display
This is displayed if the air conditioner is connected
to a super multi system when operation is being
disabled.
14 LOCKED Display
This is displayed if air conditioner is locked in the
off position by the Central Remote Controller.
15 CENTRAL Display
This is displayed if air conditioner operation is
being restricted by the Central Remote Controller.
– 5 –
D
ONTROLLER ISPLAY
MANUAL