WIKA PGT23.100 Betriebsanleitung Seite 6

3. Technical data
3.2 Transmitter with model PGT23.063
Power supply U B
EN
Supply voltage effect
Permissible residual ripple
Output signal, variant I
Permissible max. load R A
Effect of load
Linearity
Output signal accuracy
Input signal rotational angle
Expanded special span
Long-term stability of electronics
Permissible ambient temperature
Permissible storage temperature
Permissible medium temperature
CE-conformity
Wiring
Wiring protection
Connection details
1) For technical reasons, up to the first scale marking, the measured value can lie outside of the class accuracy.
3.3 Model PGT23.063
Working pressure
- Steady
- Fluctuating
- Transient
Temperature influence
IP protection class
- Housing
- With liquid filling
Permissible temperatures
- Ambient
- Medium
Further technical data see data sheet PV 12.03
6
DC 12 ≤ U B ≤ 30
% FS/10 V ≤ 0.1
% ss ≤ 10
4 ... 20 mA, 2-wire
R A ≤ (U B - 12 V)/0.02 A with R A in Ω and U B in Volt, but max.
600 Ω
% FS ≤ 0.1
% of span
≤ 1.0 (limit point calibration)
% FS
< 1.6 electronic
∢ ° 0 ... 270
∢ ° < 330 (option)
% FS/a < 0.5
°C -40 ... +60
°C -40 ... +70
°C -40 ... +100
Interference emission (Limit Class B) and immunity to
EN 61 326-1
Free cable or as option miniature plug connector M8 x 1,
4-pin
IP54 per EN/IEC 60529, filled IP65
see page 9
3/4 x full scale range
2/3 x full scale range
Full scale range
max. ± 0.4 % of full scale range/10 K (when the temperature of the
measuring system deviates from +20 °C reference temperature)
IP54 per EN/IEC 60529
IP65
filled/unfilled -40 ... +60 °C
Maximum +100 °C
WIKA Operating Instructions intelliGAUGE family
V
1)
1)