Switching Off; Charging Procedure - CareFusion MicroLoop Betriebshandbuch

Switching Off

The unit is switched off by pressing the On/Off button.
The unit can be disconnected from the mains by unplugging the
charger from the mains socket or unplugging the USB cable.

Charging Procedure

The MicroLoop's internal batteries are discharged when shipped from
the factory and should be fully charged on first use. Plug the AC
adapter into the mains supply and plug the adapter output plug into
the power input socket on the cradle. The orange charging light on
top of the unit will flash to indicate charging and will turn on
constantly to indicate full charge. The blue lights on the cradle will
also be illuminated.
The batteries will take approximately 4 hours to become fully
charged.
Note: Turn off the mains supply or remove the MicroLoop from the
charger once the battery display shows fully charged. Laving the
MicroLoop on charge in the cradle may diminish the battery life.
Note: Use only the AC adapter supplied. Use of any other type may
cause permanent damage to the MicroLoop and cause a fire or
electrical hazard. Do not plug in and remove the power lead from
the AC adapter repeatedly.
Please Note: Dispose of the waste battery in accordance with EU
Waste Battery Regulations.
77